More and more security and network administrators are prohibiting the use of telnet. Unfortunately, the Stratus RSN requires that the Stratus module run a telnet server.
I was recently asked if it was OK to not run the snmpd process. The answer is yes. If you are not using an SNMP manager to monitor the availability of the system there is no reason to run the snmpd process.
Someone sent me the following trace and asked if it represented retransmissions because the “packet numbers” were duplicated.
FTP transfer times painfully high, interactive login response time way too long, getting 1 mbps out of your 100 mbps network. While I always prefer to blame the network I have to admit that sometimes it is not the network.
As the system administrator for a VOS system you typically could care less about what other hosts are on the local subnet.
A multihomed system is a system with multiple IP interfaces. These interfaces can be on the same or on different subnets. Today I want to consider protocols like FTP and NDMP.
First a little background, TCP has a concept called maximum segment size (MSS). This is the largest segment (of data) that the TCP stack will accept.
Having two interfaces in a module on the same subnet does not give you two interfaces into and out of the module.
Paul covered CPU utilization and code paths but there is another very important aspect of many applications – network utilization.
I recently was asked to do some analysis of a trace file, it was only 161 seconds in duration and contained a little more than 2.6 million frames. I was amazed to discover that approximately 75% of those frames where either ping requests or ping replies.